arizona window replacement Archives - Page 6 of 7 - K & J Windows, LLC

Do You Install Replacement Windows from the Inside or Outside?

Do You Install Replacement Windows from the Inside or Outside 

The Arizona climate is unforgiving to inefficient windows. If you are looking to lower your energy bill and replace your outdated windows you need to be aware of the proper steps to take.

One of the most important steps in window installation is deciding to install the windows from the outside of the building or from the inside. The answer is not as cut and dry as many would believe and oftentimes will depend on the climate surrounding the building.

Installing Windows from the Outside

Installing windows from the outside comes with its own set of pros and cons. For big jobs, installing windows from the outside can be quicker because you do not need to enter the house. This is especially important for windows at high heights.

Installing from the exterior of the building can be more difficult to position and level properly. Without knowing how it looks from the inside, a window installed improperly from the exterior can be detrimental to the interior aesthetic. Furthermore, if the window is not installed correctly the seal could malfunction and let hot air or water seep into the home.

Windows installed from the outside are visible from the front yard. Depending on the look you are going for, this can be a good thing or a bad thing. Windows that can be seen from the outside can be less secure against intruders.

Installing Windows from the Inside

K & J Windows, LLC | Do You Install Replacement Windows from the Inside or Outside?Installing windows from the inside is a quicker option than installing them from the exterior. You will not have to worry about perfectly positioning the window and the job can be done in all weather conditions.

If something is blocking the frame it can be more difficult to resolve the issue. Furthermore, without the proper tools for the job, getting to the window level is a daunting task.

It’s important to research big DIY projects, especially window installations. If you are just replacing one window or you are looking for a quick and simple installation, installing from the interior of the building may be your best option.

If weather conditions are concerning, installing from the inside can prevent you from standing on a ladder in the rain. Regardless of the option you choose, you should take your time and make sure the job is done right. An improperly installed window can take away from the temperature efficiency of your home.

Consider Hiring a Professional

Regardless of the look you are going for, hiring a professional for your next window installation can ensure the job is done right. Rather than spending your valuable time and energy on a big DIY project, consider hiring a professional to properly get the job done.

Research all of your options when hiring window installers. It’s important to find a company that has a reputation for its quality work and expertise in the particular brand of windows you are installing.

Next Steps

Installing new windows is a big project and investment. Leave the hard work to experts and allow yourself the peace of mind of knowing the job is done right. At K&J Windows, we have been providing high-quality services and windows to the Arizona region for over a decade. To learn more about our services, reach out to a team member today or visit our website for additional information.

What is the Best Window for Arizona? What is the Best Window for Arizona?

 What is the Best Window for Arizona?Residing in the Grand Canyon state comes with its fair share of benefits, from fewer bugs and year-round sunshine to extraordinary views and endless outdoor activities. However, living in Arizona also comes with a scorching sun, high temperatures, and dry heat.

This makes it important to carefully consider the windows you are using in your home. Choosing the wrong type can lead to high utility bills and added discomfort, taking away from the opportunities Arizona has to offer. Here are a few factors to consider before you upgrade your windows.

Aluminum vs Vinyl

Aluminum windows remain lightweight and durable, making them a great option for wide picture windows, such as a living room window overlooking the desert. However, aluminum windows are known for inefficient seals, allowing heat to seep through the seams. This risk can be minimized by using low-emissivity glass, which has greater energy efficiency.

On the contrary, vinyl windows are associated with greater energy efficiency compared to aluminum. Many companies offer a variety of colors and styles in vinyl, allowing your creative mind to run free. In addition, vinyl windows are affordable and require little maintenance.

Single Pane vs Double Pane

What is the Best Window for Arizona?Due to the extreme heat that Arizona faces year-round, double pane windows are generally the go-to for many homeowners. Double pane windows give you maximum solar heat resistance with an added layer of protection.

Think of an office building that has a door before the actual entrance to the building. Double pane windows work in the same manner. Single pane windows only offer one layer of glass, making it more difficult to regulate the temperature of your home. Another bonus of double pane windows is noise reduction. This is important if you live by a busy highway and can increase the value of your home.

Factoring in the Solar Heat Gain Coefficient

What is the Best Window for Arizona?It’s not uncommon for the temperatures in Phoenix to linger above 80 degrees most of the year. Without the right windows, your home could be a sauna depending on the direction of the sun. The Solar Heat Gain Coefficient (SHGC) measures how much heat passes through the glass.

A lower number is more favorable, meaning less heat is passing through. Although windows with a low SHGC might cost more, they can prevent your home from heating up to uncomfortable levels and generate steady climate control.

Still Confused?

Finding the right windows for your home factors in various different elements, from aesthetics to functionality. You want to choose an option that retains energy efficient qualities, but still fits into the interior and exterior design of your home.

This is why working with an expert is recommended. At K&J Windows, we take the time to go over every feature and design option that fits your space, giving you peace of mind that you are making the right decision. We offer numerous different brands and styles, all installed by our professional team.

Reach out today to set up a consultation.

How Much Does It Cost to Replace Windows in Arizona?

How Much Does It Cost to Replace Windows in Arizona? Window replacement costs vary based on factors such as location, size, and window type. This can make it hard to know what a good price is when you are talking with contractors.

However, window replacements generally cost between $420 and $600 per window before factoring in the average labor rate of $150+ per hour.

 Let’s go into the specifics of window replacement costs including how to choose the right window, ways to lower your costs, and strategies for selecting the best contractor.

What is the Average Cost of Each Window Type?

Each window type has a different price. Here is a ballpark range of what you can expect to pay based on the window type:

  • Single Pane – $100 to $500
  • Double Pane – $100 to $500
  • Laminated/Tempered Pane – $750
  • Awning or Double-Hung – $250 -$750
  • Sliding Glass – $500 – $1500

Remember, this is before any labor is factored in.

What Factors Influence Window Replacement Costs in Phoenix?

The cost of window replacement can vary based on a few different factors, including:

  • Window size
  • Window design
  • Window material
  • Glazing type
  • Window brand
  • Scope of remediation work
  • Site accessibility
  • Disposal costs of old windows
  • Contractor company size
  • Phoenix zip code

How Much Does It Cost to Replace Windows in Arizona?Since there are multiple factors that influence window replacement costs, it’s best to reach out to a few different contractors to determine if you are getting a fair price. Keep in mind the complexity of the job will also impact the cost. For example, replacing windows on the second floor will cost more compared to the ground level. This is because more equipment and safety features are required.

How Do You Choose the Right Windows for Your House?

There is a trade-off between cost and design when replacing your windows. The more intricate and complex the design, the higher the price tag. If you are interested in a new design, consider the following items:

  • Is design more important than functionality? If you have a strict budget, you will be better off choosing a simple window design that maximizes thermal regulation.
  • How will the design fit into your home? You want a design that pairs well with the exterior of your home. You may want your house to stand out on your street, but for the right reasons. This is where computer simulations can be beneficial, giving you a visual of the windows before you open your wallet.
  • Is the design energy efficient? Prioritizing energy efficiency can not only help you save on your monthly bill, but can also lead to a tax credit. In addition, future buyers will inquire about the energy efficiency of your windows, creating a selling point.

Finding the Right Window Contractor

Choosing the right contractor is essential. An unqualified installer can lead to a higher monthly bill, leaks, and wasted money. Ask around your friends and family to see if they have any personal recommendations. Online reviews don’t always depict the true nature of contracting companies.

Furthermore, receive multiple quotes from contractors before you make your decision. You would be surprised at how much the price can vary. A contractor that is unwilling to provide you with a quote can indicate serious red flags.

The good news is that you don’t have to spend hours online trying to find the right window replacement contractor. Our team at K&J Windows has the expertise, reviews, and availability you need to replace your windows. Reach out today to schedule a consultation.

Choosing the Right Color for Your Windows and Doors

Choosing the Right Color for Your Windows and DoorsWe know windows and doors play a significant role in enhancing the aesthetic of a building. But, how about the color of this element? Well, your window and door color can significantly impact a space’s overall look and feel. This is why choosing the right color can boost your space’s curb appeal.

However, choosing the right color for your windows and doors can take time and effort, as there are various factors to consider. This article will guide you through selecting the right color, taking into account the architectural style of your building, the surrounding environment, and your taste. Whether you prefer neutral colors, bold shades, or custom hues, this article will give you the tools to make informed decisions and achieve stunning results. Ultimately, choosing the right color for your windows and doors can create a harmonious, inviting, and beautiful home.

Factors to Consider in Choosing the Right Color

Choosing the Right Color for Your Windows and DoorsWhen selecting a color for your windows and doors, several factors must be considered to ensure you make the right choice.

Firstly, the architectural style of your building is an essential factor to consider. For example, traditional homes may look best with a classic white or beige color, while a contemporary home may benefit from bold, eye-catching colors like red or blue.

Secondly, the surrounding environment is another key consideration. The color of your windows and doors should complement the natural colors of the surrounding landscape, such as the green of trees and the blue of the sky.

Personal taste and preference are also critical factors to consider when choosing the right color. Consider your style and the overall look and feel you want to create in your home. If you prefer a minimalist, neutral look, consider a white or gray color, while if you like a more vibrant look, consider a bold color like red or blue.

So far, choosing a color you love will make you happy every time you look at your windows and doors is essential.

Popular Colors for Windows and Doors

Popular colors for windows and doors can vary greatly, depending on personal preferences and the overall style of a building.

Neutral Color

Neutral colors, such as white, beige, and gray, are timeless options that work well with any architectural style and provide a clean, crisp look. These colors are trendy for homes with a minimalist or contemporary design, as they blend well with the surrounding environment and offer a neutral backdrop for other design elements.

Bold Color

Bold colors, such as red, blue, and green, are also popular options for windows and doors. These colors can add a pop of color and personality to a building and work best when used as an accent rather than the main color. For example, consider a red front door for a classic, inviting look or green windows to complement the natural surroundings. These bold colors are often used to make a statement and can be a great way to add a touch of individuality to your home.

Custom Color

Custom colors are also an option for those who want a truly unique look. You can choose any shade you desire with custom colors, from muted pastels to bright neons. Custom colors are an excellent choice for those who want a color specific to their taste and style that truly sets their home apart from the rest.

Overall, these colors are all popular choices that can enhance the overall aesthetic of a building. Whether you prefer a classic look or something more eclectic, there’s a color out there that’s perfect for you.

How to Incorporate Color into Your Windows and Doors

Choosing the Right Color for Your Windows and DoorsIncorporating color into your windows and doors can be a fun and creative process. There are several ways to add color to your windows and doors, depending on your personal style and the look you’re trying to achieve. Here are a few ways to incorporate color into your windows and doors:

Painting or Staining: The most straightforward way to add color to your windows and doors is to paint or stain them. This method is perfect for those who want a single, bold color that covers the entire surface of the window or door. Choose a color that complements the overall look of your home and the surrounding environment.

Adding Trim or Molding in a Contrasting Color: Another way to add color to your windows and doors is to add trim or molding in a contrasting color. This method is perfect for those who want a more subtle touch of color, as the trim or molding will only be a portion of the overall surface. Consider a white window frame with a red trim, for example.

Mixing and Matching Different Colors: For a more eclectic look, consider mixing and matching different colors on your windows and doors. This method is perfect for those who want to incorporate multiple colors into their home and create a unique look. For example, consider a blue front door with red windows or green windows with a white door frame.

Incorporating color into your windows and doors can be a fun and creative process. Whether you prefer a single bold color, a subtle touch of color, or a mix of multiple hues, there are many ways to add color to your windows and doors. Get creative and have fun with it!

K&J Window and Door Experts Can Assist

Don’t wait any longer to enhance the comfort and security of your home! Contact K&J Window and Door Experts today to schedule a free consultation and take the first step towards beautiful, energy-efficient windows and doors. With years of expertise and a commitment to customer satisfaction, K&J is the ideal choice for all your window and door needs. Call now to experience the difference quality makes!

How long does it take to remove and replace a window?

 How long does it take to remove and replace a window?To better answer this question, one has to understand the conditions that necessitate the removal and replacement of the window. If you are building a new house, you should first consider the type of windows you want.

Yes, they might differ from one room to the next, but knowing the type is essential as it affects how long it will take to replace them later. Also, the type of house will affect the duration.

For example, removing and replacing a window in an apartment will require a different amount of time than replacing a window in your stand-alone home.

Removing and installing a window in an apartment

This will take anywhere between 30 minutes and 1 hour per window. The range is due to some factors, such as reach. Some windows might be more challenging to reach than others, meaning more time.

How long it takes to remove and replace a window in a bungalow

How long does it take to remove and replace a window?This will take approximately 20 minutes per window. Yes, it is actually much easier to install a window in a stand-alone house than in an apartment.  

Now, you should know that numerous things would affect these durations. Here are other things that you also have to consider:

  • Storey building – the duration needed will be affected by how high up the apartment is. The windows of apartments on lower floors are easier to remove and replace than those on the upper floors.
  • Design of window – it will take much time to remove and replace a window if it has a complex design or is custom-made. Also, the time will be affected by whether you are installing a similar design to what you have removed or a new one.
  • Size of the window – larger windows will take more time to replace than smaller windows. They will also require more laborers to ensure they are removed and installed correctly.
  • State of the frame – is the frame being replaced as well? What condition is it in? It will take more time if the frame has to be replaced. Also, if you change the design of the window, you might also have to change the frame. This will affect the amount of time needed. You will also need more time if the frame is being customized.
  • Other repair work – the duration it takes to remove and replace a window will also be determined by the other repair works involved. For example, do you need more waterproofing work to be done? If so, then it will definitely take more than the maximum 1-hour mentioned. Damaged frames and walls that surround the window might also require repair.
  • Accessibility – You also have to consider how accessible the window is. That is why replacing windows in a high building takes longer than in a bungalow. But other things can affect accessibility. For instance, trees can make it harder to reach the windows, especially from outside. Other debris might also make it harder for you to access the window.

How to reduce the time taken to remove and replace a window

How long does it take to remove and replace a window?Now that you know what you need to consider, you probably also want to know what you can do to reduce the amount of time needed.

First, you should hire a professional company to remove and replace a window. Inexperienced personnel tend to be slower and also prone to mistakes that have to be undone and revised. That will waste time. Professional companies might be more expensive, but you can be assured of quality work done in the minimal time possible.

To reduce the amount of time you need, you also have to remove any debris and trim down trees that might block access to the window before the installer arrives. This will make it easier for them to ensure they are out of your hair as soon as possible.

Want to remove and replace a window in a short amount of time? You can contact KJ Windows for an instant quote. We have over 20 years of experience in modern and classic window installation.

Ways to Update Your Home Without a Major Renovation in 2022

 Here are 4 great ways to update your home without a major renovation in 2022With prices on everything from gas to groceries skyrocketing around the country, many of us are not in a place to undergo a major home renovation. Luckily, it doesn’t take a full-blown renovation to make a big difference in the design and functionality of your home. 

Today, our Phoenix home experts are sharing some of our favorite low-cost ways to update your home. Any of these minor updates are guaranteed to make a major impact without a major blow to your wallet. Stay tuned and get ready for a home refresh!

Here are 4 great ways to update your home without a major renovation in 2022: 

  1. Open Up Your Space

If you’re looking for a home renovation idea that doesn’t cost a dime, consider rearranging your furniture to create an open floor plan. You can make your living space seem larger by removing some of the bulkier, outdated furniture that gets little use and moving other pieces around. 

If you have large mirrors laying around, find a new home for them in your living room across from the windows for an optical illusion that makes the space seem even bigger. Suddenly, you’ve got yourself an open floor plan!

  1. Have Fun With Paint

Here are 4 great ways to update your home without a major renovation in 2022One of the cheapest and quickest ways to update your home without a major renovation is by simply painting a room, a single wall within a room, or even the kitchen cabinets. Are you tired of the same white walls you have been looking at for the last ten years? 

Make a change and paint the bathroom blue, create an accent wall in the bedroom, or modernize your kitchen by painting the cabinets gray or white. The options are endless and all you have to do is pick up a paint swatch, decide on your colors, and get to work.

  1. Swap Out The Lighting

When was the last time you switched up the lighting in your home? If you’ve found that your home is poorly lit or your light fixtures are no longer serving your style preferences, it’s time for an upgrade. Head to your local home improvement store and pick out some new floor lamps, table lamps, or ceiling fixtures to brighten up your home and add a modern touch that more accurately reflects your style. 

  1. Replace Your Old Windows

Our team at K&J Windows has proudly watched countless Arizona homes get an instant facelift after replacing their old windows. Old, damaged, or outdated windows can hinder your home’s curb appeal and lead to unsafe or uncomfortable conditions in the home. 

If you’re ready for a change, allow our window experts to help you determine the best windows for your unique style and budget. With a broad selection of quality window components to choose from, K&J Windows has something to offer every homeowner.

Top-Rated Phoenix Window and Door Company

If you’ve been searching for easy ways to update your home without a major renovation in 2022, we hope that this blog post has given you some exciting new ideas. For a Phoenix window replacement, look no further than the professionals at K&J Windows. 

We offer a wide variety of home window replacement and installation services that are guaranteed to meet the needs of every Phoenix homeowner. Contact our team today to get started on your next home renovation project. 

Best Materials for New Window Frames

Best Materials for New Window FramesIf you’re looking for a way to ramp up security, lower your energy bills, and keep out the glare of the harsh Arizona sun, it might be time for new windows. Before embarking on the window replacement process, it’s important to select the window components that work best for your needs. So, what are the best materials for new window frames?

In this easy-to-read guide, our window experts at K&J Windows are breaking down our top picks for the best materials for new window frames. Our vast selection of quality window components ensures that we have something for every home style and budget.

Wood Window Frames

In terms of aesthetics and meshing with your home’s decor, wood is an easy choice. Wood guarantees to give your home a natural, earthy, and comforting feel. Plus, you can stain or paint wood window frames to match the rest of your home interior.

On top of looking sleek, paint and stain can help to insulate your windows against humidity and insects. When opting for wood window frames, it’s essential that you take the time to treat them to avoid damage from moisture (i.e., mold and mildew), as well as to maximize the window’s insulation power.

Fiberglass Window Frames

K & J Windows, LLC | Best Materials for New Window Frames

Try to imagine fiberglass window frames as “wood 2.0.” They require far less maintenance than wood frames, but they provide a similar aesthetic to painted wood. Fiberglass allows you to capture that woodsy, home-y vibe with far less of the upkeep.

Fiberglass also excels in practicality, as it is considered one of the strongest and most durable materials on the market. These types of window frames will ward off extreme heat and cold, while allowing more natural light into your space due to its smaller size.

Vinyl Window Frames

Of all the materials you can use for your new window frames, vinyl is among the most energy efficient. Its ability to seal in warm or cold air will relieve some of the pressure from your heating and air conditioning systems, meaning your jaw won’t hit the floor when you see your energy bill in the mail.

Not only is vinyl great for insulation against outside temperature, but it is also wonderful for insulating against loud noise. So, if you live in the city, near an airport, or just like to enjoy peace and quiet, vinyl is one of the best materials for new window frames.

Aluminum Window Frames

Best Materials for New Window FramesSimilar to vinyl window frames, aluminum frames bring affordability and minimal upkeep to the table. One of the key benefits of aluminum frames is that they are next-level when it comes to lasting power. They won’t fade or warp in the Arizona sun, and they always rise to the occasion on those surprisingly cold desert nights.

By being both strong and slender, aluminum window frames provide homeowners with the best of both worlds. They can keep you safe and secure, while still allowing for optimal views and exposure to natural light.

If you decide to go with aluminum frames, you’ll want to maximize insulation by investing in windows with a thermal barrier in the frame. This is a protective strip of rubber or plastic that separates the inside and outside of the frame to curb heat conduction and condensation.

New Window Frames in Phoenix, AZ

When you work with K&J Windows, anything can become the best materials for new window frames. We work with Arizona’s leading window manufacturers to ensure that we offer our customers nothing but the best.

Regardless of which types of frames you choose, our Phoenix window experts are here to fulfill all your replacement window needs. Serving the greater Phoenix area, our team at K&J Windows guarantees efficiency, quality, and competitive prices.

Contact us today to learn more about our window and door replacements or to get an instant quote!

Things to Consider When Buying New Windows

Things to Consider When Buying New Windows

Things to Consider When Buying New Windows When making any kind of investment into your home, it’s important to do your research. As with anything else, there are many things to consider when buying new windows. It can be difficult to navigate the buying process if you don’t know what to look for.

Today, our team at K&J Windows is breaking down some of the most important things to consider when buying new windows. By the time you’ve finished reading, you will be able to take on the purchasing process with confidence. 

Here are the top 4 things to consider when buying new windows: 

  1. Price

For many people, the most important part of buying a new window is finding a product that fits in their budget. Setting a budget prior to beginning your search is essential, so make sure to get that out of the way first. 

At K&J Windows, we offer an expansive online collection of windows that are guaranteed to fit into any budget. The beautiful thing about our company is that we never compromise on quality. This means that regardless of your budget, you are guaranteed to be satisfied with the results.

  1. Quality

Things to Consider When Buying New Windows

When buying new windows for your home, you should never overlook the importance of quality. Let’s say you purchase poor-quality windows from a poor-quality installation. From improper installation to windows that leak within a year, there are many things that could go wrong. 

If you prioritize quality when buying new windows, you will wind up saving tons of money in the long run. Not only do we only use the highest quality materials, but we only partner with trusted window manufacturers in Phoenix. If you want windows that look good and last for years to come, quality is non-negotiable.

  1. Energy-Efficiency

Did you know that investing in energy-efficient windows can save you up to 15 percent on your energy bills? According to the U.S. Department of Energy, leaky and inefficient doors and windows account for up to 25 percent of the energy bills for the average household. 

When you seek out quality energy-efficient windows, you can save money on your utility bills and keep out the heat on those blistering summer days. At K&J Windows, we offer a variety of energy-efficient window components so you can customize the perfect energy-efficient windows for your home. 

  1. Style

Things to Consider When Buying New Windows

Before you can purchase new windows, you need to identify the kind of style that will fit into your home. The right windows can tremendously enhance your home’s curb appeal, which can ultimately increase property value. 

Don’t concern yourself solely with the quality and cost of a window without taking its appearance into account as well. Take some time to browse through our online collection of windows to identify the window style that works best with your home.

  1. Safety

This may be the last item on our list, but it is certainly not the least important! Safety is an incredibly important thing to look for when buying new windows. Whether you have small children that you want to keep inside or are concerned about keeping intruders out, safety is everything. 

People sometimes forget that certain window types and styles can be an unnecessary risk. When buying new windows, make sure you speak to our window experts about the safest types of frame materials and hardware so you can make the right choice for you.

Home Replacement Windows in Phoenix, AZ

Our Phoenix window experts at K&J Windows are here to help you find the right fit for any home style and budget. We are one of Arizona’s most trusted door and window providers because we prioritize the highest level of quality and customer service.

If you’re ready for a quote or have any questions about the window replacement process, contact us today to speak with one of our window professionals.

Can Energy-Efficient Windows Save Me Money Can Energy-Efficient Windows Save Me Money?

Can Energy-Efficient Windows Save Me Money?

Can Energy-Efficient Windows Save Me Money

When purchasing new windows, there are several questions you might ask. One of the most popular questions that we get time and time again is ‘can energy-efficient windows save me money?’ With the right window, the answer is yes. Energy-efficient windows can absolutely save you money.  

At K&J Windows, our team has years of experience delivering stellar products that wind up saving our customers money in the long run. We do this pairing with only the top providers to offer the highest quality of energy-efficient windows on the market. 

Today, we are sharing some of the biggest ways that energy-efficient windows can save you money. From lower energy bills to increased furniture protection, you might be shocked by all the ways our windows can benefit your daily life. 

Tax Credits

Can Energy-Efficient Windows Save Me Money

When you thought about ways energy-efficient windows can save you money, we would hazard a guess that tax credits weren’t the first thing to come to mind. That being said, it’s very real! According to the IRS, purchasing and installing energy-efficient windows grants you a lifetime tax credit of up to $500 in total.  

I don’t know about you, but we think that’s a pretty great incentive to invest in fantastic new windows. Think of it as an instant rebate for the money used to purchase the windows! The only caveat here is that you have to make sure to file for your tax credit.

This is a great incentive to buy an energy efficient window and is in a way an instant rebate for the money you spend on the window.  If you decide to purchase energy efficient windows, make sure to file for your tax credits. 

Reduced Energy Bills

The most commonly talked about way that energy-efficient windows can save you money is by lowering your energy bills. On average, installing new double pane energy-efficient windows can save you 12% monthly. 

Double pane windows help to save you money year-round and offer different benefits in different seasons.  During the summer, the two panes work to keep unwanted heat out of your home. During the winter they do the opposite; working to keep all that precious heat inside of your home. Because they help to prevent wasted heat or air conditioning, energy-efficient windows can noticeably change your energy bills for the better. 

Other Benefits of Energy-Efficient Windows

So, when faced with the question ‘can energy-efficient windows save me money,’ you now know that the answer is yes. However, did you know that there are also a ton of other benefits of energy-efficient windows to consider?

Here are some of the top benefits of energy-efficient windows to be aware of:

  • Greatly reduce unwanted outside noises, thanks to the double panes
  • Added coating on the window panes works to reduce sun damage on your furniture and carpets (a big deal for Arizona homeowners!)
  • Helps to minimize the UV rays that pass through your home, which is hugely beneficial to skin protection and overall health
  • Increases the resale value of your home
  • Naturally harder to break than traditional windows, which keeps you safe

Can Energy-Efficient Windows Save Me Money

Home Replacement Windows in Phoenix, AZ

Here at K&J Windows, our team of Phoenix window experts are here to help guide you through the window shopping process. Whether you are looking for energy-efficient windows or energy-efficient doors, our expansive collection has what you’re looking for!  

Serving the greater Phoenix area, our team is dedicated to providing you with the highest quality of customer service. If you’re ready for a quote or have any questions contact us today to speak with one of our window professionals.

How Often Should You Change Windows in a House?

How Often Should You Change Windows in a House?

How Often Should You Change Windows in a House?When it comes to purchasing windows, one question that many buyers forget to factor in is: how often should you change windows in a house? Depending on the location, budget, and quality, the lifespan of a new window can last anywhere from 15-25 years.

Most home windows will last around 15-25 years with a few repairs along the way, but eventually you will need window replacements. Our team of experts at K&J Windows has narrowed down some of the top signs that tell you it’s time for new windows.

Here are 4 signs that your home windows need to replaced:

  1. The windows are getting stuck. 

Years of opening and closing the windows in your home eventually creates wear and tear on the frames. It’s inevitable. Over time, this can cause the window frame to bend or crack, resulting in the window being hard to open or close. 

If you are struggling to open or close a window in your home, this is a likely indicator that it’s time to change it out for a new window. 

  1. Your energy bills are through the roof. 

How Often Should You Change Windows in a House?Have you noticed your energy bills going up lately? Your old windows may be to blame. Old windows have a tendency to lose efficiency over time. 

At K&J Windows, all of our windows are energy efficient, which means you won’t be overspending on the heating and cooling of your home. If your energy bills have been higher than usual for a while, this is a definite sign that it may be time to replace your windows. 

  1. The room feels drafty. 

Whether you are relaxing on the couch or cooking in the kitchen, you should be warm and comfortable in your home. If you find yourself needing to wear a jacket inside during the winter months because of the cold air coming in from outside, it’s time to evaluate your windows. 

High quality windows should be airtight when closed. While caulking may work to solve this problem in the short term, drafty windows are a good sign that you should consider replacing the entire unit.

  1. The windows are cracked or damaged.

How Often Should You Change Windows in a House?A cracked window can lead to many problems in your home. Water getting in when it rains, insects making their way inside, and cold air blowing in are just a few examples.

At K&J Windows, we offer various types of glass so you can choose the type that best fits your specific budget and needs. If you see any cracks or other damages in your windows, then it’s time to consider changing them out. 

Home Replacement Windows in Phoenix, AZ

No matter what problems you are having with your windows, our experts at K&J Windows will guide you through the replacement process. Serving the greater Phoenix area, our team of highly experienced professionals is dedicated to providing you with the best level of customer service, as well as the highest quality of windows.  

If you’re ready for a quote or have any questions about the window replacement process, we are here for you! Contact us today to speak with one of our window professionals.

1 4 5 6 7

Ask About Our Financing Options - Enjoy 0% Financing

Close Welcome Bar
Get a Quote Now!