How Do You Measure a Window for Replacement?
Are you thinking about replacing your windows? Upgrading your old, leaky windows to energy-efficient ones is a terrific way to weatherproof your home. And the best part? Daring DIYers can replace them on their own.
But if you’re about to type ‘how do you measure a window for replacement?’ into your search bar, we’re going to stop you right there. K&J Windows is the leading provider of windows and doors in Phoenix, and our team is revealing exactly how to measure your windows for replacement in today’s blog post.
Steps to Follow for Window Replacement
So, how do you measure a window for replacement? While the process isn’t very difficult, it does require precision. Here’s how to measure your windows for replacement:
-
Accuracy is Essential
When recording your measurements, remember that accuracy is key. It doesn’t matter whether you’re replacing a single window or redoing your entire home, it’s important to take your time and measure carefully.
-
Check for Square
Once you take your first measurement, you’ll know whether the existing window frame is square. Essentially, this means that all four corners of the window are 90°. If the window frame isn’t square, the new window won’t be able to open.
To check for square, hold the tape measure taut, and measure diagonally from inside the upper left corner to inside the lower right corner. Then, carefully record the measurement. Repeat the process in the other diagonal direction and record that measurement. If the two numbers are within ¼ inch of one another, your window is square. If not, you’re going to want to call an expert.
-
Measure the Width
After confirming your window is square, you’ll measure the window’s width. For accurate results, you’ll have to measure the window in three places: the bottom, the middle, and again at the top.
Position the tape measure against the window jamb on both sides. (The jamb is the vertical board running along the window sash, which is where the window opens and closes.) Then, do the following:
- Bottom measurement. Slide the window up and measure from jamb to jamb at the lowest point.
- Middle measurement. Slide the window all the way open and measure from jamb to jamb (aim for as close to the middle as possible).
- Top measurement. Close the window and measure from jamb to jamb at the highest point.
Make sure you carefully record each measurement. Then, highlight or circle the shortest one.
-
Measure Window Height
Measuring the window’s height is fairly similar to measuring the window’s width. Again, you’ll want to take three measurements: on the left, in the middle, and on the right. Measure from the head jamb (the top) to the bottom sill (which is the horizontal board the bottom of the window rests on). Then, carefully record the measurements.
Top Window and Door Installer in Phoenix
So, how do you measure a window for replacement? Simply follow the above steps and round your numbers to the nearest ⅛ inch. Then, contact the K&J Windows team to order custom replacement windows for your home.
This will take approximately 20 minutes per window. Yes, it is actually much easier to install a window in a stand-alone house than in an apartment. 
Now that you know what you need to consider, you probably also want to know what you can do to reduce the amount of time needed.
When Arizona homeowners think about how they can elevate their homes, painting and buying new furniture are some of the first things to come to mind. What many people forget is that the windows in our homes are not just necessary functional elements, they also play a massive role in the curb appeal and overall aesthetic of a home. 
If you have fiberglass or wood windows that still work great but could use an aesthetic update, you can give them a refresh by repainting the window frames and sills. Pick a neutral color like white that goes with anything or paint them the same shade as your walls for the monochromatic look everyone has been raving about. 
Have you taken the plunge and decided to undergo a window replacement? Congratulations! Not only can a window replacement elevate the aesthetic appeal of your home, but it can increase the value of your property and reduce energy costs. 
If you can’t be present during the replacement process, you should make arrangements for a friend or neighbor to let the installers in. Don’t forget to disarm any security alarms that you might have in place and make arrangements for your pets to ensure that they are in a secure place away from the work area.
As Arizona window experts, new customers come to us with a wide range of questions. One of the most common questions we get asked is: how long does it take for new windows to be installed? While every window installation project is different, we are going to share the factors that affect installation time so you know what to expect.
How Long Will My Window Installation Take?
Top Window Installation Companies in Phoenix, AZ 
When choosing windows for your house, you have various options, and one of them is whether you should get 
The major difference between the two is that single pane windows come with one layer of glass while double pane ones have two layers. The latter comes with a layer of either krypton or argon gas between the panes.
If you live in a place where storms are imminent, you need to get the right type of windows for your house. Double pane windows can help eliminate the need for storm windows. Once you install double pane windows, you also don’t need any additional protection against the elements, be it high summer temperatures or extreme winters.
Windows are a big component of your home’s overall outlook, and you can create different effects on your house using different window styles. So, you should choose the right 
Picture windows are locked in place and don’t move. However, that doesn’t make them obstruct the outside view, which adds a wow factor. Since they don’t have an opening mechanism, their upkeep is simple and they come with a weathertight seal.
Bay windows are grouped and designed to extend from your house. They come with exciting design features and are extremely functional. They can create a shelf or bay on the inside.
Other than giving your house a more glamorous look, windows also contribute to the comfort of your home. However, they do have a lifespan that can range from 10 to 25 years. Indeed, many manufacturers of Windows will provide a 10 year warranty. So, how do you know that your 
If you note that if a window is difficult to open, that could be a tell-tale sign that it needs replacing. Warping of the frame is usually the culprit. This is due to the normal weather changes from sunlight and heat to rain and cold. A window could also fail to open because it was painted over or poorly installed. In some instances, poor construction of a house can cause damage to your windows.
If you live in a noisy area such as beside a busy road or near an airport, your windows should provide a high level of noise reduction. Windows that refuse to close properly will let in noise. Damaged or improperly installed sealing could also prevent a window from closing properly. If you have single-panned windows, it would be worthwhile to replace them with double-panned ones to reduce noise.
Everyone loves hardwood floors, right? Although they are a bit pricier to install than wall-to-wall carpet, hardwood floors portray an elegance that is going to pay off in the long run. 
Energy efficient windows are designed to prevent air from escaping your home. In short, they offer homeowners a simple and effective way to lower the cost of their utility bills. However, there’s a bit more to them than just that.
Do you live in a bustling city? Near an ongoing construction project? Or maybe your neighbors are just plain noisy?
Whether it’s keeping air in or making sure unwanted air stays out, energy efficient windows are an easy and successful way of maintaining your home’s temperature.